Comments
Phone number + 31 (0) 113 307178
Email kortgene@schepenkring.nl
Address
Veerdam 3, Kortgene 4484 NV
The Netherlands
The Netherlands
Route calculate route
Stable, seaworthy ship with lots of interior space and headroom. Over the years many things tackled and refurbished.
The Moody 333 has a center cockpit with a nice tub to sit in and from which you have a good view to the bow of the ship.
In 2019 the entire upholstery was renewed; cushions, curtains, carpet (except the cushions of the bed in the aft cabin.
The Webasto heater is mounted in the storage box and is not used by the owner. The heater needs to be checked for proper operation.
The propeller shaft seal is equipped with a Volvo seal, which was renewed in 2024. A 2-blade fixed propeller (TZ-13x14,5 RH-14823) is mounted. The fuel tank is filled with GTL as fuel, but this can also be replaced by Diesel.
Engine maintenance has been carried out annually, and there are additional spare parts on board for the engine; complete gasket set, v-belt, impellers, oil and fuel filter, morse control cable.
Other work done on the engine, which has been repaired 2014 leaking cylinder head gasket, 2019 fuel pump overhaul, 2022 engine alignment and new flexible coupling
The sprayhood was renewed in 2018, with larger windows and a stainless steel support on the outside of the sprayhood, for extra support when stepping from the gangway into the cockpit.
In the cockpit a separate cockpit table can be mounted on a support. This is from the brand Lagun and from 2022.
The owner's sailing area has been the Netherlands and the Belgian coast, but also made longer trips to London and Orwell. The ship has been on shore every winter from October to April in winter storage
The underwater hull was provided with an epoxy treatment in 2010 using the Hotvac Hull Care method.
In 2022 the hull was stripped and 5 layers of Epoxy armor coating were applied and provided with Epifanes coppercruise antifouling. The last treatment with antifouling was in 2024.
In 2023, the keel was stripped and provided with epoxy filler and 5 layers of epoxy armor coating.